we bought a Panasonic Kx P 2123 24 dot matrix printer for tattoo stencils we cant figure out how to load paper and get it to printer. we hooked it up to our laptop via parraell/USB cord.
The printer is installed correctly and under control panel it is detected and says ready. I am using it for tattoo stencils but want to run a test page first. I typed up a few lines on word and went to print it and couldn’t get anything?

Technorati Tags: control panel, dot matrix printer, laptop, panasonic, panasonic kx, stencils, test page, usb cord

Whenever I connect my laptop to the TV I cant find the right configuration for the screen resolution either I get bad quality image or larger than my TV screen I tried all available resolutions on PC and all aspect ratio on TV but still can get it right.
please don’t advice to call Technician because I called too many and no one knew how to fix it

Technorati Tags: aspect ratio, bad quality, laptop, quality image, resolutions, tv screen

Camera: Panasonic Lumix DMC-FT1
Problem: Camera is not saving photos

Hi, my camera started responding very slugglishly yesterday. I took a few pictures, and some of them wouldn’t save. If I tried to switch my camera off, the screen would freeze on the "Saving photos". I checked the SD card on my laptop and those photos were coming up as blanks. I formatted the card and the camera recognises it, but it’s still not saving photos. When I try to view the photo I’ve just taken, the screen goes blank and the camera stops responding. Any ideas, please?

Thanks for your help
Thank you, retiredPhil.

You can format the card on your computer if you use the SD formatter (http://www.sdcard.org/consumers/formatter/).

Anyways, I formatted it with my camera afterwards and the same thing happens. The camera freezes while saving, and it is attempting to save to the card.

The camera doesn’t seem to be sufficiently waterproof, and might have taken some water damage over the time. After taking pictures under-water it’d behave erratically for a little while, but then always come back to full operation. I haven’t submerged it for a long while, which is why the current problem is more baffling.

Technorati Tags: camera panasonic, consumers, ft1, laptop, panasonic, panasonic lumix dmc, photo, photos, sd card, sd formatter, thanks for your help, water damage

My panasonic PT-LC80UI projector turns off after just 7-10 minutes of play. I have tried playing a movie of my laptop from both RGB ports and also from a DVD player through the yellow white and red ports. Both end up doing the same thing. Is there a setting or something that may be the problem or is it an internal part causing it. Can you please give some sort of directions on how to fix this.
Thanks
Figured it out it’s because once the lamp goes past 2000 hours it has a safety feature that allows it to turn off after a given time. All I had to do was reset the bulb.

Technorati Tags: dvd player, laptop, panasonic, panasonic pt, ports, projector, safety feature

laptop but in high def what do i do

Technorati Tags: high def, laptop

I do not have a PC input on a panasonic th-42px80u plasma screen HDTV and all I have is a VGA port on my Acer Aspire 5515 laptop, I got this VGA cord that connect to y,pr,and pb i have the port in the back of the TV put i don’t know how to get it on the TV can someone give me a step by guide to help or something like it

Technorati Tags: acer, hdtv, laptop, panasonic, panasonic th, pc input, plasma screen, vga port

The fax is a panasonic trying to set to my laptop HELP!

Technorati Tags: panasonic

Hi, i need help! I am having problem watching movies from my laptop to my Plasma TV. I am connected from a VGA port to the component port. Do I need a special configuration after connecting the cable? At the input labels which options do I have to select for the component? My laptop is a Gateway Intel Celeron, processor 1.4GHz, 760 MB of RAM. My TV Panasonic Vierra plasma 58". Please help! Thanks

Technorati Tags: intel, intel celeron processor, labels, laptop, panasonic, panasonic vierra, plasma tv, tv panasonic, vga port

I am particularly looking for a Panasonic Toughbook.

Technorati Tags: panasonic, panasonic toughbook

Hello!

I bought a Panasonic SD20 on Friday and made some footage which I’ve only transferred to my laptop today. The first thing I notice is the lines around the edges of everything. I’m presuming this is because it is interlaced? I never thought it would be that bad though… the picture is virtually unwatchable! It’s an AVCHD clip with a .mts extension on the file playing in Windows Media Player.

So… I import the footage into After Effects which sorts out the lines automatically and the footage looks great.

But… when I RAM preview the footage skips (This wasn’t happening when I played the raw file in WMP). It plays normally for a random amount of time and then it skips 10 frames ahead for two frames and then goes back. This is still present when I output the file and I’ve tried about four different file formats to render in.

However, when I play the clip on it’s own in WMP it plays fine… but has the lines.

Is this a compatability issue with After Effects and the movie files? Is it possibly an error with the camcorder or an error with After Effects? etc etc

Any advice you could give would be gratefully recieved!
By the way, I had a Samsung HD camcorder before using the same laptop and software and there were no issues, so I don’t think it has anyhting to do with my setup. The only difference I can think of is that the Panasonic uses AVCHD and the Samsung used mpg4. Thanks.
Thanks iridflare. It was a Samsung HMX20

Technorati Tags: amount of time, compatability, file formats, hd camcorder, movie files, panasonic, raw file, samsung, samsung hd, sd20, sorts, windows media player, wmp

I have a Panasonic Toughbook CF-51 for work, but I wanted to get a wireless card for it. Which wireless cards would be compatible, and which would be the best? Thanks beforehand.
It does have built in wireless, but I was hoping a wireless card added would make it more stable? I currently use a 2Wire modem, from U-verse AT&T.

Technorati Tags: 2wire modem, amp, panasonic, panasonic toughbook cf, u verse, wireless cards

I have a Panasonic PV-GS9 MiniDV Camcorder w/20x Optical Zoom 800x digital zoom and I’m having a hard time with trying to upload it to my vista laptop. It didn’t come with any software and I have a USB and when I plug it to my laptop, it just makes the ding noise but no automatic play dialogue. My Windows Movie Maker doesn’t detect it either. A little help? It’s really important… I have to edit my uncle’s funeral tribute… thanks in advance

Technorati Tags: dialogue, funeral tribute, hard time, laptop, minidv camcorder, panasonic, panasonic pv gs9, thanks in advance, windows movie maker, zoom

When i connect it to the PC and turn it on in view mode, it says Connecting To PC. I have left it for 10m a few times but still nothing appears in My Computer! am currently charging the battery to see if it needs abit more juice but I would really like to be able to get my pictures… Any help appreciated! Thanks!

I have a 3CCD Panasonic PV-GS180 digital video camera. It records onto miniDV. The video is crisp and the colors are very vivid on the camera’s LCD screen. However, I tried capturing the video into Adobe Premiere Pro to edit, and the video appears very dull. I’m editing on a Dell Inspiron 700m laptop and using the DV firewire cable to transfer video. Any ideas on why the colors are not as vivid on the computer? The video I am capturing was filmed inside under indoor lighting, but the colors are tremendous on the camera itself. I don’t know why the computer captured image has almost a gray dullness to it. I thought the 3CCD camera would give a much better image. Any ideas on how I could adjust or fix this?

Technorati Tags: 3ccd camera, 3ccd panasonic, adobe premiere, colors, dell inspiron, dell inspiron 700m, dell inspiron 700m laptop, digital video camera, dv firewire, indoor lighting, inspiron 700m, lcd screen, panasonic, panasonic pv gs180, pv gs180

I have a toshiba laptop with a vga output and a panasonic 42” plasma tv. I would like to check my e-mails and surf the net by looking at my big screen Tv; unfortunatelly, the plasma tv does not have any computer inputs on the back. I went to Best buy store and they told me that I should buy a VGA to DVI adaptor and a cable with the DVI in one end and HDMI on the other. Well I bought these 2 items and connect the VGA adaptor to my computer and the HDMI to the back of the tv and I get nothing at all.
Can someone please tell me what I did wrong. I am so dissapointed…

Technorati Tags: best buy, best buy store, computer inputs, hdmi, panasonic, panasonic 42 plasma, panasonic 42 plasma tv, screen tv, toshiba, toshiba laptop, vga adaptor, vga output, vga to dvi adaptor